All New Hulk 4x4 Minebars
Hulk 4x4 is pleased to announce the introduction of Hulk 4x4 Minebars - HU9770 & HU9771.
Both of the Hulk 4x4 Minebars are suitable for 12 or 24 Volt applications and come equipped with premium components such as;
- Brigade Tonal Reversing Alarm
- 103 Series Low profile Amber LED Beacon
- 2 x ADR Approved LED Rear Combination Lamps
- HU9771 unit also comes with 2 x Nordic CANIS GO 410 High Intensity LED Work Lamps mounted at either end of the Minebar.
The Brigade Reversing Alarm is a 97db Tonal unit that provides the traditional “Beep, Beep” sound and comes with an IP68 Rating, because of the environmentally sealed housing that is vibration, dust and water resistant.
With its low profile aerodynamic design, the Amber 103 Series LED Beacon comes with 12 flash patterns including a rotating flash pattern. It is an SAE J845 Class I and J575 rated beacon that also complies to IP67 rating as well as ECE R10 and R65, meaning that there will be no noise interference or feedback when the beacon is activated. The highly durable polycarbonate lens measures 64mm from the base to the top of the lens. The aluminium housing houses the 18 x 3 Watt high-intensity LED’s that draw a minimal current of 3.2amp at 12 Volt.
Two slimline rear LED Combination Lamps are found mounted at either end of the bar, providing Stop, Tail, Indicator and Reverse lamp functionality. The combination lamps come with a clear durable polycarbonate lens and they are ADR Approved as well as being IP67 Rated.
The CANIS GO 410 LED Work Lamps that are used on the HU9771 Minebar is a high quality, compact designed, low current draw work lamp, providing a bright and powerful 1,000 Effective Lumens light output in a Flood beam pattern from each unit. The black cast alloy housing is environmentally sealed, providing IP68 and IP6K9K protection. The work lamps also have over-voltage, over-temperature, spike and polarity protection.
All of these components found on the Hulk 4x4 Minebars come pre-wired via a 4m long, 8 Wire Sheathed harness assembly that is all clearly labelled of their required connections.
The Minebar’s bar is constructed from a high quality, heavy duty black anodised aluminium extrusion. It provides a low profile platform that is exclusively designed and manufactured in Australia. The extruded aluminium bar measures 1.2m wide and it provides greater strength and adaptability with the stepped edges allowing use with Rhino Rack™ and other leading brand’s universal or vehicle specific mounting kits. A mounting channel runs the entire length of the bar, allowing virtually unlimited mounting options.